Working process and using method of snake skin tube

First of all, the zippers, buttons, wind collars and other metal things on the raw materials should be cleaned to prevent damage to the thorn strip after feeding into the machine. Place the cleaned raw materials on the feeding board, put the gear in neutral position, start the motor, and push the handle slowly to the feeding position after the operation is normal. After the operation is normal, push the raw materials to the flower eating pole (do not feed the fingers, do not push too fast, the raw materials must not be too thick, and the thickness should not exceed 1.5mm), If you get stuck or feel that the power is insufficient (the speed drops), you can use the reverse gear to exit.